Henyue | HRYC-430 8+1 Renk Sıralı Flekso Baskı Makinesi

A. DESCRIPTION

a. Unwinding unit and rewinding unit

• unwinding tension is controlled by magnetic powder.
• stop when material run out.

b.Web guiding system

• with splicing table
• The paper guide roller adopts high hardness anodized
• adopt the ball screw electric actuators
• electric guiding device, system can correct when paper goes skewing.
• detection mode: check the edge.
• Precision:±0.1mm

c. Feeding system

• double press rubber roller to feed paper
• adopt servo motor for driving.

d. Printing unit

• printing unit has gear box.
• pneumatic for opening and closing anilox roller and printing roller
• adopt ceramic anilox roller. One set. Decide by customer
• printing roller is made by aluminum. One set. Decide by customer.
• no need to adjust again when you change the doctor blade and anilox roller.
• stainless steel ink box.
• adopt the petals structure, stable pressure and faster changing without any tool.
• printing plate automatically cleaning function: printing roller keeps rotating for 1.5s to pass the ink to paper when machine is stopped each time, it can make plate clean.
• anilox roller rotate itself function: anilox roller will rotate itself when machine is stopped, it will avoid ink dry on face of anilox roller.
• gear mode:cp1/8

e. Dryer system

• UV dryer 9 pcs

f. Vision system

• take photos of printing products, can be moved to left or right.
• enlarge the image for inspection

g. Automatically stop when printing job is over
h. PLC + touch screen
i. Auto register
j. Pre register
k. Corona treatment
l. Relam/delam
m. Cold foil
n. Magnetic cylinder 1 pcs

B. MAIN TECHNICAL PARAMETERS

1 Maximum diameter on unwinding 800mm
2 Printing repeat 178mm-610mm
3 Maximum width of material 440mm
4 Maximum printing width 430mm
5 Power of main motor 15KW
6 Voltage requirement 380V 3PH 50Hz if different, please kindly inform us
7 Machine speed 0-152m/min
8 Plate thickness 1.7mm or 1.14mm
9 Plate mounting tap 0.38mm
10 Printing precision ±0.12mm
11 Printing cylinder 9 pcs
12 Ceramic anilox roller 9 pcs
13 Air pressure 0.6Mp

C. CONFIGURATION